Electricity is paid every month and never appears on a garment's costing sheet. It sits inside a lump called running cost. It is easy to pull out, because a meter and a tariff are the only two things you need, and what it shows about a bad day is worth the hour it takes.
The sum
Units used × price of a unit ÷ garments made
A unit is a kilowatt-hour: a thing drawing 1 kilowatt for 1 hour. The tariff is on your bill; the units used are on your meter.
The units come from adding up what is switched on: each machine's power, taken from the plate on its motor, times the hours it runs.
A worked example
These figures are made up to show the sum. They are not a benchmark, not a tariff and not a claim about any machine. The line is the one in the cut-and-make rate article: 12 operators, 8 hours, 260 garments a day at 81.25% efficiency. Assume each machine draws 0.4 kilowatts while it runs, the lights, fans and iron draw another 6 kilowatts all day, and a unit costs ₹9.
- Machines: 12 × 0.4 × 8 = 38.4 units.
- Everything else: 6 × 8 = 48 units.
- Together: 86.4 units, ₹777.60 a day.
- Per garment: ₹777.60 ÷ 260 = ₹2.99.
In the cut-and-make article the line's running cost for power, rent, supervision and repairs was an assumed ₹15,000 a day. The power here is ₹777.60 of it, about 5%.
What a bad day does to it
The lights, the fans and the machines that are switched on keep drawing power whether garments come out or not. So the day's ₹777.60 is fixed, and the garments it is shared by are not:
- 65% efficiency (208 garments): ₹3.74 a garment.
- 81.25% (260): ₹2.99.
- 100% (320): ₹2.43.
The unit pays 75 paise more per garment on the bad day. Next to a wage bill it is small. It is still the same lesson as in the line efficiency article: the costs that run whether or not garments come out are paid per garment, and fewer garments make each dearer.
If the tariff moves
At ₹12 a unit instead of ₹9, the same 86.4 units cost ₹1,036.80, which is ₹3.99 a garment at 260: a rupee more on every garment from a change the unit did not make. It is the number to recalculate when the electricity bill changes.
Read the meter, don't trust the plate
The plates give what a machine can draw. The meter gives what the unit did draw. Read it at the start and end of a normal day and use the difference in place of the sum above.
What the sums leave out
- Made-up numbers. 0.4 kilowatts, 6 kilowatts and ₹9 are assumptions. Use your meter and your bill.
- The bill has more than units. A fixed charge, a demand charge, a time-of-day rate or a tax may sit on it. The price of a unit to use is the bill's total divided by its units, not the headline tariff.
- Machines differ. A sewing machine's draw rises and falls as it runs, and cutting, pressing and compressors draw their own. The meter takes care of all of it.
- A cut-and-make quote. If your running cost is a round figure, this is a way to check the power inside it. The laser cutter's running cost article does the same sum for one machine.
Put the units a day and the output from your own line into the production efficiency calculator and divide: that is your rupees of power per garment, and how it moves with a bad day.